Hidden LED or other sources providing indirect lighting integrated into the architecture behind crown molding, beam systems or other ceiling details to up-light the architecture. Adding drama, volume and dimension to the space. LED is the most prevalent lamp in these fixtures.

(View Products)

Linear LED flush mount slot lighting systems exposed and integrated into the architecture adding bands of continues light. Contemporary look and feel adding an artistic architectural lighting element, yet providing accent and task lighting functions. LED is the most prevalent in these fixtures.

(View Products)

Recessed or surface mount point sources accentuating specific art, furnishings or other artistic element within the architecture to draw attention and engage the viewer. Most heads are adjustable to 40+ degrees for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures.

(View Products)

Recessed or surface mount point sources with the ability to specifically shape the light to the confines of the art canvas or outlining furnishings. The most dramatic lighting systems for fine art and furnishings displays. CMH and Halogen Lamps are most prevalent in these fixtures.

(View Products)

LED flat panel lighting that can adhesive directly to flat light transparent stone or other counter or wall materials. These long life edge lit panels can come in 12 x 12 tiles or manufactured to match the shape of the piece being back lit. Holes can cut or drilled into the center portions of the light distributing panels.

(View Products)

LED linear lighting integrated into bookshelves hidden behind a wood fascia or routed into the shelves. This allows a glow of illumination on the books or other display objects within the shelving.

(View Products)

LED linear and or point source lighting integrated into open or behind closed glass doors. This allows a glow of illumination in the cabinetry for displaying objects within the cabinet.

(View Products)

LED linear and or point source lighting integrated into open or behind closed glass doors. This allows a glow of illumination in the cabinetry for displaying objects within the cabinet.

(View Products)

Decorative lighting fixtures are the jewels added to the architecture and interior design. These enhancements are largely decorative in nature and must blend with the architectural style and interior pallet. Although proper care in light glob selection, wattage, lumen output and color rendering are all necessary in order to enhance the space.

(View Products)

Plaster trim down lighting is also available in round or square openings. This system allows for a seamless round or square opening without any ceiling trim. The plaster floated trim can be painted out with the ceiling finish color all the way into the opening. These fixtures typically range from 5” to 6” diameter openings. Most heads come as fixed or adjustable for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures.

(View Products)

Pendant lighting fixtures are applied directly on the finish ceiling and hang down to various lengths to bring the target illumination down to human scale. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. Most heads come as fixed or adjustable for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures. Round, square or unique decorative lighting designs are also available.

(View Products)

Recessed Down lighting also know as hi-hats, flush lights or can lights are common in most built environments. These fixture typically range from 4”,5”,6” diameter openings with either a white, black or metal spun finishes. Most heads come as fixed or adjustable for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures. Round or Square openings are also available.

(View Products)

A Semi-Recessed Down Light is a fixture where the housing is recessed above the ceiling and the fixture protrudes below the surface of the ceiling for maximum adjustability.

 

(View Products)

Surface Down lighting fixtures are applied directly on the finish ceiling or wall. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. Most heads come as fixed or adjustable for directing the light at target areas or objects. LED and PAR lamps are the most common lamping specifications. Round, square or unique designs are available.

 

 

(View Products)

Multiple pendant lighting elements come in 2, 3 & 4 one piece linear or rectangular modules. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. These fixtures are utilized when multiple point sources illumination is needed in a compact area and the space is conducive to pendant mount products. Most heads come as fixed or adjustable for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures.

 

(View Products)

Multiple down lighting elements come in 2, 3 & 4 one piece linear or rectangular modules. These fixtures are utilized when single point sources illumination is needed in a compact area and a clean look and feel is needed on the ceiling plane. Most heads come as fixed or adjustable for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures.

 

(View Products)

Multiple surface lighting elements come in 2, 3 & 4 one piece linear or rectangular modules. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. These fixtures are utilized when multiple point sources illumination is needed in a compact area and the space is conducive to large surface mount products. Most heads come as fixed or adjustable for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures.

 

(View Products)

Multiple bladed surface mount paddle fans are used to move air for comfort primarily in bedrooms with high or vaulted ceiling and exterior sitting areas where air movement is desired. Some units come with light kits as well.

 

 

(View Products)

Typically recessed ceiling exhaust units used to expel odors, steam or excess heat from bathrooms, steam room, shower rooms, laundry rooms or garages. Low noise units and clean ceiling elements are desirable.

 

(View Products)

Garage lighting is typically general in nature providing broad coverage for maneuvering cars. 1×4, 2×2 and 2×4 in surface and recessed are the typical selections. Additional task lighting may be required for work benches, bicycle and motorcycle tuning areas etc. Trash removal lower level ambient light controlled separately from the general light is also a consideration in garage lighting design. LED and fluorescent lighting are most prevalent in these fixtures.

(View Products)

In ground up lights are recessed into the finish floor systems and provide up lighting or accent lighting onto architectural features. Stone columns, wood columns and wall washing with light are a consideration for this type of lighting. Most internal heads come as fixed or adjustable for directing the light at target areas or objects. LED, MR16 and PAR Lamps are most prevalent in these fixtures.

(View Products)

Handrail linear lighting can be an integrated handrail/light fixture or designed into a custom wood or metal rail system to provide accent and safety illumination. Products are available for interior and exterior stair systems in linear and some point source systems. LED lamps are most prevalent in these fixtures.

(View Products)

Linear LED strip lighting comes in flat ribbons or ridged lengths and in most cases is field cut able. The tricky part is the voltage drop and the remote driver/transformers needed to power and dim the source. These strips are used primarily in architectural coves, wall pockets, under hearths, stair treads and cabinet lighting. Wet applications are available as well. LED lamps are most prevalent in these fixtures.

 

(View Products)

Surface mono-point lighting fixtures are applied directly on the finish ceiling wall or other structural applications. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. Most heads come as adjustable for directing the light at target areas or objects. Most products come with an integral driver/transformer. Most petite units require remote driver/transformers to power and dim the source.  LED, MR16s are the most common lamping specifications. Round, square and unique designs are available to match the architecture and interiors.

(View Products)

Integrated Motion control lighting is fed with constant power (not switched) and energizes upon movement. Some fixtures come with built in motion sensors. All others require an external motion sensor to engage the light.

(View Products)

Pendant lighting fixtures are applied directly on the finish ceiling and hang down to various lengths to bring the target illumination down to human scale. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. Most pendant fixtures are decorative in nature with selection and stem lengths determined by the interior designer. LED candelabra lamps are most prevalent in these fixtures.

(View Products)

All shower lighting must be wet applications rated.

 

 

 

(View Products)

Step lighting can consist of individual path lights recessed into walls or LED lighting integrated into stair treads. LED’s are the most common lamping specifications. Round, square and linear designs are available to match the architecture and interiors. LED and incandescent lamps are most prevalent in these fixtures.

(View Products)

Best to have protective coverings and be able to withstand impact for either surface or recessed products. LED and Fluorescent are most prevalent in these fixtures.

 

 

 

(View Products)

Surface lighting fixtures are applied directly on the finish ceiling or wall. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. LED and PAR lamps are the most common lamping specifications. Round, square or unique designs are available.

 

 

 

(View Products)

Recessed track lighting systems allow for a clean continuous slot in the ceiling or walls. This application eliminates the viewing of multiple track heads projecting below the ceiling as in the surface track application. The recessed adjustable track head system allows for maximum adjustability within the channel for focusing the directed light onto its intended area or object. Significant architectural design and framing condition need to be coordinated with these types of systems. LED, MR16s and PAR lamps are the most common lamping specifications.

 

 

 

(View Products)

Surface track lighting fixtures are applied directly on the finish ceiling or wall. These products would be typically used where there is no recessed depth (other than the electrical junction box) due to structural or mechanical impacts. LED and PAR lamps are the most common lamping specifications. Round, square or unique designs are available.

(View Products)

Up lighting techniques are integral to the overall enjoyment of the space. It is not flattering to just have illumination coming from above. Up lighting adds dimension, shadowing and drama to the architecture. LED, MR16s and PAR lamps are the most common lamping specifications.

 

 

 

(View Products)

Bathroom vanity and makeup area lighting is one of the most critical areas in the built environment. A combination of properly selected fixtures and color corrected lamp sources that allow for face lighting, down lighting and ambient lighting creates the magic. LED, MR16s and PAR lamps are the most common lamping specifications.

(View Products)

Up lighting or grazing wall techniques are integral to the overall enjoyment of the space. Washing a specific wall in light can draw the eye quickly through the space and giving focal points within the architecture. LED, MR16s and PAR lamps are the most common lamping specifications.

 

 

 

(View Products)